Top Machinery Stocks For 2014

Even as Federal Reserve policymakers seemed unsure of the immediate direction of the global economy, debating whether disinflation could be an issue in the short term at their meeting March 18-19, most of them expected inflation would return to 2 percent in the next few years, according to minutes of the gathering released April 9.

But just when within the next two years inflation would start rising has been a point of debate, and the fact that producer prices exceeded economist expectations this week reinforced the idea that policymakers, for all their good intentions, may not time interest rates correctly to contain runaway inflation, as historically has been the case.

And this situation also clearly calls for the need to have investments that can simultaneously enhance earnings and protect against inflation, which can appear more suddenly than policymakers have forecasted. Energy infrastructure or midstream Master Limited Partnerships (MLPs) can deliver this investment flexibility, offering investors exposure to the shale boom or commodity price rises, tax benefits, and most MLPs’ contracts are protected against the producer price increases we saw this month.

The prices businesses receive for their goods and services rose in March, defying a long stretch of subdued inflation across the U.S. economy, according to the Wall Street Journal. The producer price index for final demand, which measures changes in prices for everything from food and machinery to warehousing and transportation services, rose a seasonally adjusted 0.5% from February, the Labor Department reported on April 11. The index rose 0.6%, excluding the volatile categories of food and energy.

Economists surveyed by the Wall Street Journal had expected the index to rise a more modest 0.1%, and predicted a 0.2% increase excluding food and energy. The index fell 0.1% in February, unchanged from the Labor Department’s initial estimate. The PPI for final demand was up 1.4% in March from a year earlier! , the biggest year-over-year increase since last August.

The PPI measures the prices businesses receive from buyers such as governments, consumers and other businesses. The Labor Department overhauled the report this year to measure a much broader swath of the U.S. economy.

Best Warren Buffett Companies To Invest In 2015: CNH Industrial NV (CNHI)

CNH Industrial NV is a Netherlands-based company primarily engaged in the manufacture of heavy machinery and vehicles equipment. It divides its activities into four main businesses. The Agricultural Equipment offers agricultural equipment under the New Holland Agriculture, Case IH brands and the Steyr brand. The Construction Equipment produces excavators, bulldozers, backhoes, compactors and other construction equipment under the New Holland Construction and Case Construction Equipment brands. The Trucks & Commercial Vehicles manufactures trucks and a commercial vehicles, including buses, coaches and special vehicles under Iveco, Iveco Bus and Heuliez Bus brands, as well as it produces quarry and mining equipment through Iveco Astra, and fire fighting vehicles through the Iveco Magirus brand. The Powertrain offers transmission systems, engines for marine application and power generation through FPT Industrial brand. Advisors' Opinion:

• [By Lisa Levin]

  CNH Industrial NV (NYSE: CNHI) shares tumbled 2.47% to reach a new 52-week low of $11.44. CNH Industrial reported an 11% drop in its third-quarter profit.

• [By GuruFocus]

  According to GuruFocus list of 52-week lows, these Guru stocks have reached their 52-week lows.Deutsche Bank AG (DB) Reached the 52-Week Low of $36.04The prices of Deutsche Bank AG (DB) shares have declined to close to the 52-week low of $36.04, which is 36.1% off the 52-week high of $54.49. Deutsche Bank AG is owned by 3 Gurus we are tracking. Among them, 2 have added to their positions during the past quarter. 1 reduced their position.Deutsche Bank Aktiengesellschaft is a stock corporation organized under the laws of Germany. Deutsche Bank Ag has a market cap of $36.74 billion; its shares were traded at around $36.04 with a P/E ratio of 413.90 and P/S ratio of 0.90. The dividend yield of Deutsche Bank Ag stocks is 2.10%.David Dreman (Trades, Portfolio) owns 58,725 shares as of 03/31/2014, an increase of 404.64% from the previous quarter. This position accounts for 0.2% of the $1.29 billion portfolio of Dreman Value Management. Mario Gabelli (Trades, Portfolio) owns 6,250 shares as of 03/31/2014, which accounts for 0.0015% of the $18.53 billion portfolio of GAMCO Investors.Ross Stores Inc (ROST) Reached the 52-Week Low of $67.16The prices of Ross Stores Inc (ROST) shares have declined to close to the 52-week low of $67.16, which is 21.2% off the 52-week high of $81.99. Ross Stores Inc is owned by 14 Gurus we are tracking. Among them, 7 have added to their positions during the past quarter. 5 reduced their positions.Ross Stores, Inc., is a Delaware Corporation. It turned public with its IPO in August 1985. Ross Stores Inc has a market cap of $14.21 billion; its shares were traded at around $67.16 with a P/E ratio of 17.00 and P/S ratio of 1.39. The dividend yield of Ross Stores Inc stocks is 1.10%. Ross Stores Inc had an annual average earnings growth of 23.20% over the past 10 years. GuruFocus rated Ross Stores Inc the business predictability rank of 4.5-star.ROST recently reported earnings per share for the 13 weeks ended May 3, 2014 of $1.15, up from $1.07 fo

• [By Holly LaFon]

  The largest detractor for the quarter was CNH Industrial (CNHI), a global agricultural and construction equipment manufacturer, which fell 11%.� CNH released its nine-month results, which showed revenue growth of 0.6%, but the company�� margins were adversely affected by Iveco, its trucks and commercial vehicles segment.� Iveco�� margins fell short of expectations due to tough pricing, high launch costs, negative mix and increases in bad debt provisions.� Management maintains full-year guidance of 3-4% revenue growth.� We believe improvements in the Iveco division will help CNH Industrial achieve its long-term margin targets.�

Top Machinery Stocks For 2014: Austin Engineering Ltd (ANG)

Austin Engineering Limited is engaged in the manufacture, repair, overhaul and supply of mining attachment products, general steelwork structures and other associated products and services for the industrial and resources-related business sectors. The Company operates in four segments: Australia, which includes mining equipment, other products and repair and maintenance services; Americas, which includes mining equipment and other products, consisting of North America and South America; Asia, which includes Indonesia for mining equipment and other products, and the Middle East, which includes aluminum smelter equipment and products. In October 2013, Austin Engineering Limited completed the acquisition of the business of Servigrut. Advisors' Opinion:

• [By Julia Leite]

  South African miners rallied after a recovery in gold prices. The FTSE/JSE Africa All-Share Index climbed 1.5 percent in Johannesburg, with Harmony Gold Mining Co. (HAR) and AngloGold Ashanti Ltd. (ANG) adding at least 5.2 percent.

Top Machinery Stocks For 2014: Chart Industries Inc (GTLS)

Chart Industries, Inc., incorporated on June 25, 1992, is an independent global manufacturer of engineered equipment used in the production, storage and end-use of hydrocarbon and industrial gases. The Company supplies engineered equipment used throughout the global liquid gas supply chain. It operates in three segments: energy and chemicals (E&C), distribution and storage or (D&S), and biomedical. The E&C and D&S segments manufacture products used primarily in energy-related and general industrial applications, such as the separation, liquefaction, distribution and storage of hydrocarbon and industrial gases. Through its BioMedical segment, it supplies cryogenic and other equipment used in the storage and distribution of biological materials and oxygen, used primarily in the medical, biological research and animal breeding industries.

The Company�� products, including vacuum insulated containment vessels, heat exchangers, cold boxes and other cryogenic components, are used throughout the liquid gas supply chain for the purification, liquefaction, distribution, storage and end-use of hydrocarbon and industrial gases. It is a manufacturer of standard and engineered equipment primarily used for low-temperature and cryogenic applications. The Company�� primary customers are multinational producers and distributors of hydrocarbon and industrial gases and their suppliers. The Company sells its products and services to more than 2,000 customers worldwide.

Energy and Chemicals Segment

The Company is a designer and manufacturer of cryogenic brazed aluminum and air cooled heat exchangers. The Company�� brazed aluminum heat exchangers are incorporated into assemblies and cold boxes to facilitate the progressive cooling and liquefaction of air or hydrocarbon mixtures for the subsequent recovery or purification of component gases. In hydrocarbon processing industries, its brazed aluminum heat exchangers allow producers to obtain purified hydrocarbon by-products, such ! as methane, ethane, propane and ethylene, which are commercially marketable for various industrial or residential uses. In the industrial gas market, its brazed aluminum heat exchangers are used to produce high purity atmospheric gases, such as oxygen, nitrogen and argon, which have diverse industrial applications. The Company�� air cooled heat exchangers are used in multiple markets to cool fluids to allow for further processing or to provide condensing of fluids, including hydrocarbon, petrochemical, natural gas processing, and power generation. Its compact Core-in-Kettle heat exchangers are designed to replace shell-and-tube exchangers, offering significantly more heat transfer surface per unit volume and improving the efficiency of chillers, vaporizers, reboilers and condensers in hydrocarbon applications including ethylene, propylene and LNG.

The Company is a designer and fabricator of cold boxes. Cold boxes are engineered systems used to reduce the temperature of gas mixtures to the point where component gases liquefy and can be separated and purified for further use in multiple industrial, scientific and commercial applications. In the hydrocarbon processing industry, its cold box systems are used in natural gas processing and in the petrochemical industry. In the industrial gas industry, cold box systems are used to separate air into its atmospheric components, including nitrogen, oxygen and argon, where the gases are used in a diverse range of applications, such as metal production and heat treating, enhanced oil and gas production, coal gasification, chemical and oil refining, the quick-freezing of food, wastewater treatment and industrial welding. The construction of a cold box system generally consists of one or more brazed aluminum heat exchangers and other equipment packaged in a box consisting of a structural metal frame encasing a complex system of piping, valves and instrumentation.

The Company designs and manufactures of engineered hydrocarbon process syst! ems speci! fically for those markets requiring cryogenic processing technology. These Concept-to-Reality process systems incorporate many of Chart�� core products, including brazed aluminum heat exchangers, Core-in-Kettles, cold boxes, vessels, pipe work and air cooled heat exchangers. These systems are used for global LNG projects, including projects in the United States and China for both domestic LNG production for diesel displacement and in the conversion of LNG import terminals to export terminals, and also for use in global nitrogen rejection units (NRU) and propane dehydrogenation (PDH).

Distribution and Storage Segment

The Company is a supplier of cryogenic equipment to the global bulk and packaged industrial gas industry as well as for energy-related applications. Its products span the entire spectrum of industrial gas demand from small customers requiring cryogenic packaged gases to large users requiring custom engineered cryogenic storage systems. Its products in the D&S segment include Cryogenic Bulk Storage Systems, Cryogenic Packaged Gas Systems, Cryogenic Systems and Components, LNG Applications, Beverage Liquid CO2 Systems, and Cryogenic Services. The Company is a supplier of cryogenic bulk storage systems (stationary tanks, trailers, and ISO tanks) of various sizes ranging from 500 gallons to 250,000 gallons. End use customers for its cryogenic storage equipment include industrial gas producers and distributors, chemical producers, manufacturers of electrical components, health care organizations, food processors and businesses in the oil and natural gas industries.

The Company is supplier of cryogenic packaged gas systems of various sizes ranging from 160 liters to 3,000 liters. Cryogenic liquid cylinders are used extensively in the packaged gas industry to allow smaller quantities of liquid to be easily delivered to the customers of industrial gas distributors on a full-for-empty or fill-on-site basis. Principal customers for its liquid cylinders are th! e same gl! obal industrial gas producers and the North American industrial gas distributors who purchase its cryogenic bulk storage systems. It has developed two technologies in the packaged gas product area: ORCA Micro-Bulk systems and Tri-fecta Laser Gas assist systems. ORCA Micro-Bulk systems bring the ease of use and distribution economics of bulk gas supply to customers formerly supplied by high pressure or cryogenic liquid cylinders. The Tri-fecta Laser Gas assist system was developed to meet the assist gas performance requirements for new high powered lasers being used in the metal fabrication industry. The Company�� line of cryogenic components, including VIP, engineered bulk gas installations, specialty liquid nitrogen (LN2), end-use equipment and cryogenic flow meters are recognized in the market for their reliability, quality and performance. These products are sold to industrial gas producers, as well as to a diverse group of distributors, resellers and end users.

The Company supplies cryogenic solutions for the storage, distribution, vaporization, and application of LNG. LNG may be utilized as a primary source of heat or power at industrial or residential complexes located away from a natural gas pipeline. LNG may also be used for peak shaving or as a backup supply at remote locations. It refers to its LNG distribution products as a Virtual Pipeline as the natural gas pipeline is replaced with cryogenic distribution to deliver the gas to the end user. It supplies cryogenic trailers, bulk storage tanks, tap-off facilities, and vaporization equipment specially configured for LNG into Virtual Pipeline applications. LNG may also be used as a fuel to power vehicles or ships. The Beverage Liquid CO2 Systems product line consists primarily of vacuum insulated, bulk liquid CO2 containers used for beverage carbonation in restaurants, convenience stores and cinemas, in sizes ranging from 100 pounds to 750 pounds of liquid CO2 storage. It also manufactures and market non-insulated, bulk fountain ! syrup con! tainers for side-by-side installation with its CO2 systems. Its beverage systems are sold to national restaurant chains, soft drink companies and CO2 distributors. Its primary competitors for bulk liquid CO2 beverage delivery systems are Taylor-Wharton and other producers of high-pressure gaseous CO2 cylinders. The Company operates locations in the United States and Europe providing installation, service, repair and maintenance of cryogenic products, including storage tanks, liquid cylinders, cryogenic trailers, cryogenic railcars, cryogenic pumps, cryogenic flow meters and VIP.

BioMedical Segment

The Company�� BioMedical segment consists of various product lines built around its core competencies in cryogenics and pressure swing adsorption, but with a focus on the respiratory and biological users of the liquids and gases instead of the large producers and distributors of cryogenic liquids. Its products in the BioMedical segment include Respiratory Products, Cold Storage Systems, and Commercial Oxygen Generation Systems. Its respiratory oxygen product line consists of a range of medical respiratory products, including liquid oxygen systems and ambulatory oxygen systems, both of which are used primarily for the in-home supplemental oxygen treatment of patients with chronic obstructive pulmonary diseases, such as bronchitis, emphysema and asthma.

The Cold Storage Systems product line consists of vacuum insulated containment vessels for the storage of biological materials. The primary applications for this product line include medical laboratories, biotech/pharmaceutical, research facilities, blood and tissue banks, veterinary laboratories, large-scale repositories and artificial insemination, particularly in the beef and dairy industry.

The Company competes with Linde, Sumitomo, Kobe, Fives, Linde, Air Products, Praxair, Air Liquide, Taylor-Wharton International or Taylor-Wharton and CVA/INOX, Taylor-Wharton and Beijing Tenhai Industrial Cylinders, Acme Cr! yogenics,! Vacuum Barrier Corporation, and Ind-Burma Petroleum Company.

Advisors' Opinion:

• [By Jake L'Ecuyer]

  Top losers in the sector included Chart Industries (NASDAQ: GTLS), Jacobs Engineering Group (NYSE: JEC), and ABB (NYSE: ABB).

  Top Headline
  Merck & Co (NYSE: MRK) reported a 7% rise in its first-quarter profit. Merck's quarterly profit surged to $1.71 billion, or $0.57 per share, compared to a year-ago profit of $1.59 billion, or $0.52 per share. Excluding certain items, Merck earned $0.88 per share, up from $0.85 per share Its revenue dropped 4% to $10.26 billion versus $10.67 billion. However, analysts were estimating earnings of $0.79 per share on revenue of $10.43 billion. Merck reiterated its full-year earnings forecast of $2.15 to $2.47 per share.

Top Machinery Stocks For 2014: Sun Hydraulics Corp (SNHY)

Sun Hydraulics Corporation (Sun) designs, manufactures, and sells screw-in cartridge valves and manifolds used in hydraulic systems. The Company has facilities in the United States, the United Kingdom, Germany, Korea, France, and China. Sun Hydraulik Holdings Limited (Sun Holdings), a wholly owned subsidiary of Sun was formed to provide a holding company for the European market operations; its wholly owned subsidiaries are Sun Hydraulics Limited (Sun Ltd.) and Sun Hydraulik GmbH (Sun GmbH). Sun Ltd. operates a manufacturing and distribution facility located in Coventry, England, and Sun GmbH operates a manufacturing and distribution facility located in Erkelenz, Germany. Sun Hydraulics Korea Corporation (Sun Korea), a wholly owned subsidiary of Sun, operates a manufacturing and distribution facility. Sun Hydraulics, SARL (Sun France), a wholly owned subsidiary of Sun was dissolved in November 2011. Sun Hydraulics (India) a liaison office in Bangalore, India is used to develop new business opportunities in the Indian market. WhiteOak Controls, Inc. (WhiteOak), a 40% equity method investment, located in Mediapolis, Iowa, designs and produces complementary electronic control products. On September 27, 2011, Sun acquired High Country Tek, Inc. (HCT), which designs and manufactures a range of standard and customizable electronic control modules used to interpret electronic signals.

Screw-in Hydraulic Cartridge Valves

The Company�� screw-in hydraulic cartridge valves are offered in five size ranges and include both electrically actuated and non-electrically actuated products. The floating construction introduced by the Company results in a self alignment characteristic.

Standard Manifolds

A manifold is a solid block of metal, usually aluminum or ductile iron, which is machined to create threaded cavities and channels into which screw-in cartridge valves can be installed and through which the hydraulic fluid flows. The Company�� range of standard mani! folds enables the customers to integrate its screw-in cartridge valves into their machinery and equipment.

Integrated Packages

An integrated package consists of multiple cartridges assembled into a custom designed manifold for a specific customer to provide the specific operating characteristics of a customer�� circuit. The Company�� screw-in cartridge valves translate to integrated packages designed by the Company and result in products that are smaller in size. Due to the self-alignment characteristic, the Company�� integrated packages do not require testing once assembled.

Electronic Controllers

HCT designs and manufactures electronic controllers, which manage the function of electrically actuated valves. HCT�� products range from one valve, manually adjusted controllers to fully integrated hydraulic control systems managing multiple hydraulic valves, as well as other input and output products, such as joysticks and displays.

Advisors' Opinion:

• [By Sally Jones]

  Sun Hydraulics Corp. (SNHY): Reduced

  Up 25% over 12 months, Sun Hydraulics Corp. has a market cap of $787.4 million; its shares were traded at around $30.00 with a P/E ratio of 21.20.

Top Machinery Stocks For 2014: Colfax Corp (CFX)

Colfax Corporation (Colfax) is a global industrial manufacturing and engineering company. The Company provides gas- and fluid-handling and fabrication technology products and services to commercial and governmental customers worldwide under the Howden and ESAB brand names and by Colfax Fluid Handling. Colfax�� products are marketed principally under the brand names Allweiler, Baric, Fairmount Automation, Houttuin, Imo, LSC, COT-Puritech, Portland Valve, Tushaco, Warren and Zenith. The Company has production facilities in Europe, North America and Asia. It offers customized fluid handling solutions to meet individual customer needs. In February 2011, the Company acquired Rosscor Holding B.V. In December 2011, it acquired COT-PURITECH. On January 13, 2012, Colfax acquired Charter International plc. In May 2012, the Company acquired 91% interest in Soldex S.A.

Pumps

Colfax manufactures rotary positive displacement pumps. Its rotary positive displacement pumps consist of a casing containing screws, gears, vanes or similar components that are actuated by the relative rotation of that component to the casing, which results in the physical movement of the liquid from the inlet to the discharge at a constant rate.

Fluid Handling Systems

The Company manufactures fluid handling systems used primarily in the oil and gas, power generation, commercial marine and global defense markets. Colfax offers turnkey systems and support, including design, manufacture, installation, commission and service. Its systems include lubrication systems, which are used in rotating equipment in oil refineries and other process industries; custom designed packages used in crude oil pipeline applications; lubrication and fuel forwarding systems used in power generation turbines; packages for commercial marine engine rooms, and fire suppression systems for navy applications. Howden�� primary products are heavy-duty fans, rotary heat exchangers and compressors. The fans and heat! exchangers are used in coal-fired power stations, both in combustion and emissions control applications, underground mines, steel sintering plants and other industrial facilities. It design, manufacture and distribute fluid-handling products that transfer or control liquids in a range of applications.

Specialty Valves

The Company�� specialty valves are used primarily in naval applications. Its valve business has specialized machining, welding and fabrication capabilities that enable the Company to serve as a contractor to the United States Navy. In addition to designing and manufacturing valves, Colfax also offers repair and retrofit services for products manufactured by other valve suppliers through its aftermarket support centers located in Portland, Maine and San Diego, California.

Advisors' Opinion:

• [By Vera Yuan]

  Colfax (CFX) is a multi-platform industrial engineering and manufacturing company with a focus on two product areas: (1) gas & fluid handling, and (2) welding. The company was founded in 1995 by Steven and Mitchell Rales, best known as the founders of Danaher Corporation, and it has grown to its current size through a combination of acquisitions and organic growth. In 2012, Colfax completed the transformative acquisition of Charter International PLC, a UK-based industrial conglomerate many times its size, increasing revenues overnight from $700 million to $4 billion.

• [By GuruFocus]

  George Soros (Trades, Portfolio) just reported his first quarter portfolio. He buys Citrix Systems Inc, Baker Hughes Inc, Comcast Corp, Spansion Inc, etc during the 3-months ended 03/31/2014, according to the most recent filings of his investment company, Soros Fund Management LLC. As of 03/31/2014, Soros Fund Management LLC owns 305 stocks with a total value of $10.1 billion. These are the details of the buys and sells.New Purchases: BHI, CODE, CTRP, CLI, AVB, COMM, CNQ, AGO, AUY, ATML, ASH, BXMT, CSTM, AEM, CMA, ARE, CHKP, AUQ, BEAV, CX, ADSK, AALCP, BLK, AIG, BIIB, ADEP, AMRI, ARWR, ATHX, BALT, BCRX, BEAT, CFX, CLFD, CUR, CODE,Added Positions: CTXS, CMCSA, CNP, ALTR, BRCD, CBS, CRM, CHTR, CCJ, CIEN, BIDU, ALLE, ABT, CDNS, ACT,Reduced Positions: AAPL, CCI, AMT, ABBV, AAL, BITA, AL, ANGI, ARIA, CBST, BA, BIRT, EXAR,Sold Out: C, BAC, CRI, AMZN, AGN, CF, BRCM, COTY, BMY, AMCX, CAR, A, ADBE, AFL,For the details of George Soros (Trades, Portfolio)'s stock buys and sells, go to http://www.gurufocus.com/StockBuy.php?GuruName=George+SorosThis is the sector weightings of his portfolio:Technology18.9%Energy14%Healthcare8.3%Consumer Defensive8.2%Communication Services8.1%Consumer Cyclical5.4%Industrials5.1%Basic Materials4.9%Financial Services2.5%Real Estate1.9%Utilities0.5%These are the top 5 holdings of George Soros (Trades, Portfolio)1. Teva Pharmaceutical Industries Ltd (TEVA) - 10,310,041 shares, 5.4% of the total portfolio. Shares added by 10.67%2. Herbalife Ltd (HLF) - 4,901,337 shares, 2.8% of the total portfolio. Shares added by 52.9%3. EQT Corp (EQT) - 2,573,814 shares, 2.5% of the total portfolio. Shares added by 3.27%4. Adecoagro SA (AGRO) - 25,915,076 shares, 2.1% of the total portfolio.5. Halliburton Co (HAL) - 3,596,353 shares, 2.1% of the total portfolio. Shares reduced by 20.73%New Purchase: Baker Hughes Inc (BHI)George Soros (Trades, Portfolio) initiated holdings in Baker Hughes Inc. His purchase prices were between $51.82 and $65.27, with an estimated

• [By Holly LaFon]

  In the fourth quarter, he bought 32 new stocks. The largest new buys are: Air Lease (AL), Colfax (CFX) and Republic Bancorp Inc. (RBCAA).

  Air Lease (AL)

Top Machinery Stocks For 2014: Lincoln Electric Holdings Inc (LECO)

Lincoln Electric Holdings, Inc., incorporated in 1906, is a manufacturer of welding, cutting and brazing products. Welding products include arc welding power sources, wire feeding systems, robotic welding packages, fume extraction equipment, consumable electrodes and fluxes. The Company's product offering also includes computer numeric controlled (CNC) plasma and oxy-fuel cutting systems and regulators and torches used in oxy-fuel welding, cutting and brazing. The Company operates in five segments: North America Welding, Europe Welding, Asia Pacific Welding, South America Welding and The Harris Products Group. On July 29, 2011, the Company acquired Techalloy Company, Inc. and certain assets of its parent company, Central Wire Industries Ltd. On July 29, 2011, the Company acquired Applied Robotics, Inc. (doing business as Torchmate) (Torchmate). On January 31, 2011, the Company acquired SSCO Manufacturing, Inc. (doing business as Arc Products) (Arc Products). On March 11, 2011, the Company completed the acquisition of OOO Severstal-metiz: welding consumables (Severstal). In March 2012, the Company acquired Weartech International, Inc. In May 2012, the Company acquired Wayne Trail Technologies, Inc., a manufacturer of automated systems and tooling, serving a range of applications in the metal processing market. In November 2012, ITT Corp sold its shape cutting product lines, including the Burny and Kaliburn brands to the Company. In January 2013, the Company acquired Tennessee Rand, Inc.

The North America Welding segment includes welding operations in the United States, Canada and Mexico. The Europe Welding segment includes welding operations in Europe, Russia and Africa. The other two welding segments include welding operations in Asia Pacific and South America, respectively. The Harris Products Group includes the Company's global cutting, soldering and brazing businesses as well as the retail business in the United States. The arc welding power sources and wire feeding systems man! ufactured by the Company range in technology from basic units used for light manufacturing and maintenance to robotic applications for high volume production welding and fabrication. Three primary types of arc welding electrodes are produced: coated manual or stick electrodes; solid electrodes produced in coil, reel or drum forms for continuous feeding in mechanized welding, and cored electrodes produced in coil form for continuous feeding in mechanized welding.

Advisors' Opinion:

• [By Seth Jayson]

  Lincoln Electric Holdings (Nasdaq: LECO  ) is expected to report Q1 earnings on April 23. Here's what Wall Street wants to see:

  The 10-second takeaway
  Comparing the upcoming quarter to the prior-year quarter, average analyst estimates predict Lincoln Electric Holdings's revenues will grow 1.1% and EPS will grow 2.6%.

• [By Seth Jayson]

  Lincoln Electric Holdings (Nasdaq: LECO  ) is expected to report Q2 earnings on July 29. Here's what Wall Street wants to see:

  The 10-second takeaway
  Comparing the upcoming quarter to the prior-year quarter, average analyst estimates predict Lincoln Electric Holdings's revenues will expand 1.8% and EPS will expand 9.9%.